Mobile phone companies ventured into the budget-friendly realm. Years before, they just want to put up the best possible phone with impressive specs and performance out there on the market, but they find that not a lot of people can afford such a phone.

Motorola was the first mobile phone company to venture into the affordable mobile phone category and they’ve enjoyed much success. All other companies followed suit, thus, the affordable phone category was on.

Today, we are going to talk about the Xiaomi Redmi 2. This is one of the most affordable mobile phones out there that just costs $120. Does it have what it takes for it to be worth $120? We will find out in this article.

The design of the Xiaomi Redmi 2 isn’t stylish but that is to be expected when a mobile phone is in the budget category. It still sports the same design to its predecessor, the Redmi 1s.

At the front, you will only see three capacitative buttons at the bottom and a front camera at the top portion. At the back, you will see the rear camera with the MI logo at the bottom. The company opted for a black and white theme where the black color can be found on the front and the white at the back.

The display of the Xiaomi Redmi 2 is a 4.7-inch LCD screen with a resolution of 1280x720 and a respectable 312ppi. Since this is not a midrange phone, to say the least, having a 720p resolution screen is permissible. The screen does suffer from broad daylight, however, but it still is okay in most scenarios.

As for the operating system, the Xiaomi Redmi 2 has the Android Kitkat 4.4.4 with their MIUI 6.4 overlay. For those of you who do not know, MIUI is Xiaomi’s proprietary operating system overlay that is quite pleasing to the eyes. Unfortunately, this overlay does not have an app drawer, so that is either a downside or an upside depending on how you view it.

The camera is subpar at best. This phone comes with an 8-megapixel rear camera with LED flash and only a 5-megapixel for the front camera. The photos are quite decent but there really isn’t any wow factor to it.

Under the hood, you will find the Qualcomm Snapdragon 410 quad-core processor with clock speeds of 1.2GHz, an Adreno 306 GPU, and 2GB of RAM. The specs are pretty okay with some occasional lag when playing graphic-intensive games. Still, it performed really well when conducting benchmark tests and I could see this phone to be an affordable daily driver.

The Xiaomi Redmi 2 also comes with a 2,200 MaH battery. It may be a measly 2,200 battery capacity but since the screen is only 720p and the processor isn’t power-hungry, this phone could last you a day or two.

And finally, I love the fact that the Xiaomi Redmi 2 offers dual 4G LTE connectivity. What I mean by this is that it has 2 SIM slots and you can plug your 4G LTE-enabled SIM in either of the SIM slots and it would still work.

If I were you, I would get a mobile phone signal booster so that I will not have any problems with low signal reception.

The Xiaomi Redmi 2 is an okay mobile phone for daily use.

Most people nowadays are buying mobile phones to watch their favorite movies or TV shows on it. I mean, mobile phones these days are more than capable of doing just that. They come with big screens and they are much snappier than ever before.

Today, we are going to take a look at a mobile phone that was designed to be used primarily for media and productivity purposes. I am referring to the Samsung Galaxy Note 4.

Let’s talk more about the design aspect first. The Samsung Galaxy Note 4 is a much better in terms of build quality. The mobile phone now has a metallic rim surround it and it does not feel plastic-like compared to its predecessors.

The back cover of the Samsung Galaxy Note 4 is made out of leather making it feel sturdier than ever before. I do not like leather back covers, but hey, they look stunningly impressive when you see and hold it in real life.

The power button and volume rocker controls are situated on the right side of the mobile phone. Even though this phone is kind of big, it is surprising that the buttons can be reached without any problems.

As for the display, the Samsung Galaxy Note 4 has an impressive 5.7-inch QHD display with a very high resolution of 2560x1440 resolution with a ppi of 515. That is really impressive considering that this is a mobile phone.

Watching movies or TV shows with this phone is a visual treat as colors are able to pop up more. Heck, even gaming with this mobile phone is a joy to watch. The screen is big enough for people to enjoy media and it is small enough to fit in the pocket.

The Samsung Galaxy Note 4 also comes with the S-Pen just like its predecessors. But, this new iteration Note 4 has a much better S-Pen in that is now more precise and more accurate. In fact, you can use the S-Pen to write notes, for example, and it everything that you do will be accurately registered on the mobile phone.

A lot of people were impressed with the Samsung Galaxy Note 4’s S-Pen and a lot of them think that it is a worthy addition to complement the QHD screen.

The Samsung Galaxy Note 4 ships with Android Kitkat 4.4.4, but you now have the option to update the operating system to the latest Android Marshmallow. It is intriguing because it will be the first Samsung mobile phone to ever get the update. So if you can, be sure to update the operating system to the latest and greatest.

Under the hood, the Samsung Galaxy Note 4 is powered by a quad-core processor that is clocked at 2.7GHz and it is coupled with 3GB of RAM as well. The mobile phone is also packed with a beefy 3220 MaH battery so that it can survive long stretches of media viewing.

And lastly, the Samsung Galaxy Note 4 is also impressive. The rear camera is a 16-megapixel camera with optical image stabilization, which helps you take better photos even when you have shaky hands.

Furthermore, the front camera is also a treat as it can be angled 90 degrees so that you can take better selfies.

The Samsung Galaxy Note 4 is a really impressive media mobile phone and it can also be used for productive purposes as well. This mobile phone is fantastic and it costs only $550.

Apple just released the newest iPhone, the iPhone 6s. The iPhone 6s is the best iPhone yet as it includes the all new A9 chip, which is touted to be the best processor used in a mobile phone, as well as a really cool 12 mega-pixel camera that is able to capture vivid images and can also record 4k Videos as well.

Plus, the phone has 4G and LTE support so you will have data connectivity on the go. With these many features, the iPhone 6 is truly a monster of a smartphone. But, if you’re constantly on the go, you may very well experience low to no signal reception at all.

This is where ReachCase R79X Mobile Phone signal booster comes in. The R79X is a mobile phone signal booster specifically designed for the iPhone 6s. It comes in a very sturdy shell that has been made with “military-class” materials for ensured protection for the phone.

Here is the list of features for the ReachCase R79X:

  • Made with Military-class Polycarbonate and TPE Materials- This is to ensure heavy-duty performance. Do not worry about dropping your iPhone 6s because the ReachCase R79X will surely protect it.
  • Integrated Antenna- Works in tandem with the 6s' antenna to extend LTE signal coverage up to 3x. The antenna slides in for optimal performance.
  • Very trendy and not bulky- most other protective cases for the iPhone 6s weigh a ton. The ReachCase R79X weighs only a few pounds, and can easily be put in the pocket without any problems at all.

The ReachCase R79X does not only support LTE signals, but it can also boost 2G up to 4G frequencies as well. You can enjoy unlimited data access and improved call clarity across the board, thanks to the ReachCase R79X.

There is nothing much going on with the ReachCase R79X other than it helps protect your iPhone 6s as well as improves signal reception. With that being said, let’s look at some customer reviews:

Khali: “I've read a lot of reviews before buying the R79X because I wanted to know if it is a good signal booster. The vast majority is split, so I went on to buy it myself. The case has a very sturdy construction, and it is really true to its name when they say that it offers "military-class" protection. Furthermore, I get uninterrupted LTE signals every hour of the day. So I am here to tell you, this signal booster really works!"

Rex: "This is a high quality case for my iPhone 6s. It fits the smartphone perfectly, and it really protects the phone from any external damage. I am quite a clumsy person, and I drop my phone at times. In fact, I've already dropped my iPhone 6s on three occassions, but the ReachCase really protected it from shock and scratches! The overall signal reception also improved as I have noticed that my calls are much clearer than ever before. Would highly recommend this product!"

The ReachCase R79X Mobile phone signal booster for the iPhone 6s only costs $30. For a sturdy construction and improved signals, this is a very good mobile phone signal booster for the iPhone 6s.

weboostIn today’s world, we need the Internet more than ever. What was used as a means of entertainment can now be used for Businesses as well. To adhere to that standard, the 4G LTE medium is released. This promises greater speeds as opposed to the previous version 3G.

Now, that being said, you need to have good signal strength to be able to enjoy non-stop entertainment and good clarity of calls or VoIP applications. But, what if you’re in an area where signal can’t get through?

Getting a signal booster is a wise choice. Signal boosters acts as a repeater or an amplifier of weak signals. It gets even the faintest signal and it is able to amplify it and broadcast those strengthened signals wherever you need it.

If you’re looking for a good signal booster, then you may want to take a look at weBoost’s Connect 4G Cell Phone Booster Kit. The weBoost Connect uses a yagi-directional antenna to get signals.

The Yagi-directional antenna is an antenna that gets signals from one source. In short, you can focus on the direction of your service provider’s cell tower in order to gain the maximum amount of signal possible.

The weBoost Connect should be mounted on a high-place, preferably the rooftop or the highest floor of your house. This is to ensure that you will get a good amount of signal from your service provider’s cell tower.

According to their website, you can get signals of varying degrees depending on how much signal you can currently get. For example, if you can get 3-4 bars of signal strength, you can receive up to 3,500 sq. feet of amplified signals inside your home.

Now, I did mention earlier that the weBoost Connect is a kit, right? When you buy the weBoost connect, you will receive these items:

  • weBoost Connect 4G 65dB amplifier
  • weBoost Directional Outside Antenna
  • weBoost Panel Inside Antenna
  • 30' White Low Loss Cable (950630)
  • 2 x 15' White Low Loss Cables with Barrel Connector
  • 8" Flat Coax Cable
  • AC Power Supply
  • Installation Guide

Now, on to the installation of the product. The installation may require you to do some drilling, so if you’re not comfortable doing it, you can hire a contractor or electrician to do it for you.

Keep in mind that the best possible location to put the booster is in the highest platform of your house. That is why it is preferred that you put it on your rooftop. Furthermore, upon putting the yagi-directional antenna on the rooftop of your house, run the cable to the amplifier.

The amplifier needs to be plugged into a power source for it to work. Basically, just attach the cables to their appropriate ports (attach the shortest cable to the “Outside Antenna” port and the 30ft cable that comes with the antenna to the “Inside Antenna” port.

Power it on and you’re good to go! The only thing to keep in mind is the placement of the Antenna, other than that, installation should be a breeze.

If you’re looking to boost your service provider’s signals, weBoost Connect 4G Cellphone booster kit is a good choice.

Your R4 card will operate exactly the same in the R4 3DS edition.

Firmware kernel improvements are launched whenever necessary to get a fresh system upgrade for the Nintendo 3DS XL or 3DS consoles. That exact firmware will allow the R4 card to continue to function on the 3DS XL the same like it would on your standard 3DS.


Now... It's crucial say that for the R4 card to operate on the 3DS XL, it needs to be a 3DS R4 card which is compatible. The majority of the older R4 cards and original cards were designed for only the DS Lite and DS, and as a result, they will not be able to function on the Nintendo 3DS XL or 3DS consoles. This entire post assumes that the card can operate on the 3DS original games console.

Your 1st step would be to ensure that you have obtained the appropriate firmware for your own card from the R4 3DS firmware division. Every R4 card contains its very own special firmware kernel records. The setup details are basically the similar for each R4 Card, the only difference would be in the files you wind up getting in your firmware archive file package.

1. Unarchive or uncompressed the R4 firmware.rar file. You will see that the file name is the same as the card type, and this will be archived or compressed in either ZIP format or RAR.

2. Once you’re the folders are created through WinRAR or WinZip, you then have to press to open the file, and not simply duplicate the R4 FIRMWARE folder to your own memory card. This is really due to the fact that you have to place the files all in the ORIGIN of your memory card.

What exactly is the root of your memory card? Just look at it as a window which opens when you hit the removable drive option in your MAC or Windows file manager. With nothing in your main folder in any way.

3. On completion of copying the firmware files, you may grab some cool 3DS homebrew programs or games that you use and can download for free on your R4 from our very own 3D homebrew webpage. We constantly updating that webpage with applications and a growing number of homebrew games on a regularly.

Have you heard of the new technology with handheld gaming consoles? Nintendo, being one of the companies to introduce new gaming technologies has launched Nintendo 3DS. Well, with the Nintendo 3DS, its main feature is its 3D effect and with that, anyone would be excited to have this device. As we all know, Nintendo was able to secure its name as one of the leaders in gaming. Nintendo started as the pioneer in handheld consoles that started with the GameBoy to its newest addition to their top selling consoles.
This unit is said to be the first entry into the new revolutionary gadgets for the new gaming world. Nintendo 3DS is the first to employ the use of 3D technology in gaming consoles. Now for those who are interested in getting themselves this new unit, make sure that you will know what to expect so that you have an idea on how you can make full use of your Nintendo 3DS to its maximum performance. Listed below are just some of what things that the Nintendo 3DS has to offer.
3D Technology for Your Handheld Device
Yes, this is it! 3D gaming is literally in our hands. Be able to experience 3D gaming using your favorite handheld gaming console without the need to use those weird 3D glasses. The great part about this is that you can control if you want to play in 3D mode or the usual 2D. To do this, just locate the “Depth Slider” button on your Nintendo 3DS and have the option to switch it on and off so you would be able to choose between the new 3D look or the usual 2D. Be able to see as your game become more exciting and fun!
Dual Screen for the 3DS

This is still the same feature as the older versions of the Nintendo but the gamer will visibly see that the screens have been enhanced. Nintendo is definitely proud of its 320x240 pixel resolution. Now, for the 3D effect, the top screen divides its resolution by two as this will help create the 3D effect for the games.
Nintendo 3DS’ Circle Pad
Be ready to try out the Nintendo Circle Pad, this serves as an additional pad aside from the old D-Pad. Gamers are able to choose two pads depending on the game that they are playing. The D-pad is recommended for best accurate and control for your game while the circle pad is recommended for smooth motions.

Introducing Nintendo 3DS’ Gyro and Motion Sensors
Another great addition to this gaming console is the motion and gyro sensors. These sensors will make sure that with every movement is perfectly translated in to you game. This will give you more ease and be hyped by its fast reaction to your movements. This is yet another step that Nintendo has taken.
Backwards Compatibility of the Nintendo 3DS
One of the most common questions that previous Nintendo owners have is whether the Nintendo 3DS is compatible with their Nintendo DS games. The answer to this is, yes! Your games and almost all other existing Nintendo DS and even DSi games are indeed compatible to play with the Nintendo 3DS r4i.
Gamers all around the world would want to try out this new gaming unit. Who doesn’t? It sure emphasizes on its promise that it will be an incredible experience. With all these promising benefits, Nintendo 3DS will surely live up to its name as the next-generation in the gaming technology.

The Gateway 3DS is a super star (or at the very least an expected super star) among gamers. It was introduced in June 2013 and was met with high expectations. The question is almost a year later does it really meet the expectations that everyone had.


The purchase nets you 2 cards and a case. The red card is for the 3ds games from 4.1 to 4.5 firmware. The blue cartridge is for Nintendo DS flash carts. Do they meet their hype? That really depends on who you ask.


Die hard users are happy with the Gateway 3DS and they do not mind the added costs. Other less experienced users do not notice the difference and do not feel like the cost is justified. Whether this is the card for you or not depends on your level of experience and your need for customization.


The Pro's


These are one of a kind flashcards that allow the user to play a host of regional games as long as they fall within a certain level of firmware this is actually a blessing and a curse because while they are very up to date today in 6 months from now they may not be. As the firmware changes and it will there will be certain steps that have to be taken to up date the cards.


Of course since the cards are readily able to expand it means that you do not have to run out to buy a new card as things evolve.


The Con's


The most obvious con is the cost. The Gateway 3DS is probably 1/3 more expensive than other cards with like abilities. The cost can be justified but most people would rather save some cash and get a flash card that performs well and that is still affordable.


There are some compatibility issues as well that takes some special tweaking but with a little know how and a bit of time you can work through the issues.




Overall the performance is there and it is worth the extra expense. You do not feel any raised chips under the label like you may with other less expensive flashcards. The storage case is convenient and the cases are sturdy.


You can tell the difference in cost between this card and the bargain basement brands. It works well and is built well which some people feel offsets the extra costs that you have to pay for this type of card.